Carburetor is not only a device to provide fuel and gas mixture to the engine, but also a device to regulate the amount of oil and gas mixture delivered to the engine cylinders.

Carburetor routine maintenance and maintenance.

Regularly check whether the water level of the gasifier is normal (usually above 2/3), and pay attention to timely replenishment.

Second, the gasifier must insist on regular sewage. Generally 2-3 days once a sewage, poor gas or large amount of once a day, sewage should be in the higher pressure time, the residual liquid should be discharged to the outside.

Third, check whether the pressure gauge reading is normal, the pressure gauge should be calibrated every other year.

Fourth, the gasifier inlet filter should be cleaned after six months of ventilation, and then removed and cleaned every other year.

V. Gasifier every six months to change the water, re-exchange the water must be added after the potassium dichromate, if possible, add softened or purified water effect.

Sixth, every three months in the case of power off by an electrician to check whether the main power terminals are loose. If necessary, should be re-tightened.

Seven, local power supply voltage fluctuations such as large (to 380V ± 10% limit), it is recommended to install 220V power regulator to ensure the normal operation of electrical components and instrumentation.

Eight, every day on the vaporizer and other gas equipment, piping to do regular checks to ensure that there is no leakage.