-
Safe Operating Procedures for Carbon Dioxide Cylinders
Before use, check for gas leaks by applying soapy water and adjust until no leaks are detected before proceeding with experiments. During use, first open the main valve of the cylinder counterclockwise and observe the high-pressure gauge reading. Record the total pressure of carbon dioxide insid...Read more -
Mastering Safe Handling and Transportation of Carbon Dioxide Cylinders
When handling carbon dioxide cylinders, use hand carts, cranes, or overhead cranes for transportation. Do not rely on twisting the protective ring to move the cylinders, as this can cause the cylinders to tip over, leading to potential injuries to personnel and equipment damage. Ensure that the ...Read more -
Understanding Different Types of LNG Tanks: Choosing Safe and Efficient Storage Solutions
Introduction: In recent years, liquefied natural gas (LNG) has garnered global attention as a clean energy source. LNG tanks, as a crucial component of the LNG supply chain, play a vital role in the storage and transportation of LNG. For businesses and organizations venturing into the LNG industr...Read more -
Certainly! Before being put into use, LNG storage tanks undergo a delightful pre-cooling process.
Certainly! Here’s the combined translation of the two sections: Pre-cooling procedures and precautions for LNG storage tanks: Pre-cooling procedures: Activate the truck’s pressurization system. Once the pressure in the truck reaches approximately 0.3 MPa, open the liquid discharge va...Read more -
The difference between “natural gas cylinders for vehicles” and “welded insulated gas cylinders” filled with LNG
First of all, there is no difference between the structural safety and pressure-bearing safety of the two types of gas cylinders, but there is a significant difference in the design of the two types of gas cylinders and their use. (1) name: car bottle is used in the car, when leaving the car how...Read more -
How to overhaul the problematic dewar liquid oxygen cylinder？
Dewar bottle sealing is particularly important, any leakage may lead to the loss of gas, if the load is natural gas or perhaps flammable gas, it is likely to occur the risk of bursting, so the leak detection on the Dewar bottle (welding insulation gas cylinder) is very necessary. There are usual...Read more -
Response measures and treatment after a cryogenic storage tank leak
Cryogenic storage tank, cryogenic gas cylinder leakage treatment method 1、Immediately stop the supply of liquid oxygen, liquid nitrogen, open the blowing and drainage and immediately notify dispatch of the need for fire and rescue personnel to enter the scene of the accident; 2, circle the s...Read more -
The Correct Use of Stainless Steel Lng Cylinder
With the continuous development of the special gas industry, the need for Dewar bottles, which are used to transport special gas storage tanks, is increasing in the industry, and their effect is also increasingly prominent, although Dewar bottles and other products in the industry have gained bet...Read more -
How to prevent static electricity in cryogenic storage tanks?
(1) control the flow rate into the tank The amount of static electricity generated by the flow of oil in the pipeline is proportional to the quadratic of the flow rate, reducing the flow is an effective way to reduce the static electricity generated by the oil. (2) to prevent the impact of spatt...Read more -
Two major factors that should be noted when selecting a cryogenic storage tank: temperature and pressure
If you need to choose to buy cryogenic storage tanks, then you must find out which of its solution substances, and according to their working environment to select the right cryogenic storage tanks. In short, there are many points to note when choosing a cryogenic storage tank, we must mainta...Read more -
Introduction to the internal structure of Dewar bottle manufacturing
The key to the Dewar bottle being a reasonable liquid gas carrying tool is the internal manufacturing structure of the Dewar bottle. The early Dewar bottle is actually a double glass container. The two glass bile walls were covered with silver, and then air was drawn out from between the two wall...Read more -
Installation and post maintenance of stainless steel cryogenic storage tank
1, the installation of low-temperature storage tanks Low-temperature storage tank to the owner’s site, before the tank is lifted, it is still necessary to do the installation notice, usually a day in advance of the tank to go to the installation location for installation notice, generally ...Read more
